HifiSpeaker.wiki | Recent Update | Privacy-Policy | About Us | Contact

Planar SR-2040



Share
Pin
Send
Share
Send
Share

Brand: Planar

The Planar SR-2040 is a high-end, two-way bookshelf loudspeaker designed to deliver exceptional sound quality. Here's how I would go about planning for it:1. Room Analysis: Before installing the SR-2040 speakers, it's essential to analyze the acoustic properties of the room it will be installed in. This will help to identify any issues such as resonances, standing waves, or room modes that could affect the sound quality. Acoustic treatments, such as bass traps or diffusers, might be required to prevent these issues.2. Speaker Placement: The SR-2040 should be placed at least 6 feet apart, close to the front wall, and at least 1 foot from the side walls to improve both the bass and treble response. The top of the speaker should be at ear level when listening in a seated position, and it should not be placed near any reflective surfaces as this could cause unwanted reflections.3. Amplifier and Source Compatibility: The SR-2040 is efficient at 87dB (1W@1m), meaning it doesn't require a high-powered amplifier. However, a suitable amplifier with enough output to drive these speakers at acceptable levels should be selected for best performance. It's recommended to pair the SR-2040 with a high-quality source component such as a CD player, streamer, or turntable.4. Wiring and Connections: High quality speaker cables, preferably of at least 14 gauge, are recommended for the SR-2040 to minimize signal degradation. Banana plugs and bi-wiring can be used to refine the speaker's response further.5. Break-in Period: Like all new speakers, the break-in period is an essential part of the setup process. In the case of the SR-2040, planar speakers require more extended break-in times due to their fabric material. It's suggested to listen to the speakers for at least 72 hours before completing the setup.In summary, the setup process for the Planar SR-2040 involves room analysis, speaker placement, amplifier and source compatibility, wire selection, and break-in time. Following these steps will help ensure that the SR-2040 delivers an exceptional sound experience that meets the high expectations of discerning audiophiles.



  • Tuning range: FM, MW
  • Power Output: 20W into 8Ω (stereo)
  • Frequency Response: 20Hz to 20kHz
  • Distortion: 0.9%
  • Speaker Impedance:
  • Input Sensitivity: 2.5mV (mm), 150mV (line)
  • Signal to Noise Ratio:
  • Line Output: 0.2V (pre)
  • Dimensions: 440 x 150 x 380 mm
  • Weight: 10.9 kg
  • Year:
  • Price:

Planar SR-2040

Planar SR-2040

Planar SR-2040

Planar SR-2040

Planar SR-2040



Share
Pin
Send
Share
Send
Share